What is it?
Properties
- Fast curing: 5-10 minutes
- Packaged in convenient portions
- Easy to apply
- Can be used indoors and outdoors
- Water resistant: suitable for continuous water exposure
- Even cures under water!
- Does not deform
- No shrinkage: remains in original form
- Chemical resistant
- Grinding, drilling, sawing and painting possible after curing
What does it do?
Suitable for:
For 1001 repairs in and around the home, car, boat and caravan, machines and tools. Fill cracks and holes in stone, wood, steel, and many synthetics. Tip: Can also be used as a mouldable plug to fill screw holes.
Not suitable for:
Not suitable for Polyethylene (PE), polypropylene (PP), PTFE.
Getting started
Before use:
Working conditions
Recommended application at temperatures between +15 °C and +25 °C.
Personal safety
Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.
Surface requirements
The materials to be bonded must be dry, clean, free of dust and grease.
Preliminary surface treatment
Degrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper).
During use:
Directions for use
Take 1 or several portions depending on the size of the application. Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.
After use:
Stains/residue
Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Storage conditions
Store cool, dry, frost-free and tightly closed.
Handy tips!
We gathered some tips that come in handy. Not just for DIY jobs, but also for creative projects. Useful to know!
