Tube 3 g

Universal light-activated repair adhesive


What is it?

Back to top

What does it do?

Suitable for:

BISON BOOSTER offers a universal application range and works on transparent as well as on non-transparent materials: Bonds, fills, and seals many plastics, porcelain, ceramics, glass, metal, wood, rubber, and much more.

Not suitable for:

Not suitable for PE, PP, and PTFE.

Back to top

Getting started

Before use:

Personal safety

The LED emits a small amount of UV light. UV rays can be harmful for eyes and skin. Do not look directly into sources of UV light. Do not direct the LED at people or animals.

Surface requirements

Surfaces to be glued must be clean, dry, and free of dust and grease.

Preliminary surface treatment

Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.

During use:

Directions for use

To pierce the membrane, turn the whole cap clockwise firmly onto the tube. Unscrew the top cap to reveal applicator. Apply adhesive generously to one side and press parts together. Switch on the LED: Place the lamp upright and move the switch downwards. Activate the curing by raying the blue light for 5sec. onto the adhesive (distance < 5cm; emergence of heat is harmless). After use: Clean nozzle with a dry tissue and replace cap quickly to prevent exposure of the remaining adhesive to the light.

Points of attention

Contains cyanoacrylate. Bonds skin and eyelids together in seconds. Keep out of the reach of children.

After use:


Remove wet glue stains immediately with acetone. Cured glue can only be removed mechanically.

Storage conditions

Store the tube in a dry, cool and frost-free place.

Back to top