What is it?
- Fast curing: 5-10 minutes
- Packaged in convenient portions
- Easy to apply
- Can be used indoors and outdoors
- Water resistant: suitable for continuous water exposure
- Even cures under water!
- Does not deform
- No shrinkage: remains in original form
- Chemical resistant
- Grinding, drilling, sawing and painting possible after curing
What does it do?
For 1001 repairs in and around the home, car, boat and caravan, machines and tools. Fill cracks and holes in stone, wood, steel, and many synthetics. Tip: Can also be used as a mouldable plug to fill screw holes.
Not suitable for:
Not suitable for Polyethylene (PE), polypropylene (PP), PTFE.
Recommended application at temperatures between +15 °C and +25 °C.
Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.
The materials to be bonded must be dry, clean, free of dust and grease.
Preliminary surface treatment
Degrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper).
Directions for use
Take 1 or several portions depending on the size of the application. Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Store cool, dry, frost-free and tightly closed.