What is it?
Shock and vibration proof
What does it do?
Locks bolts, nuts, screws and tap bolts which should be able to be unscrewed later on. Seals screw threads and protects them from rusting.
Not suitable for:
Not suitable for applications with synthetics and wood.
Do not use at temperatures below +10 °C
Preliminary surface treatment
Parts to be locked must be dry and free of dust and oil. Degrease, e.g. with acetone. Remove any loose rust beforehand with a wire brush or similar.
Directions for use
Apply Metal Lock to screw thread and assemble. Metal Lock hereby also works as a lubricant. After assembly, do not move or shift parts.
Points of attention
Metal Lock is an anaerobic adhesive. This means that the product cures in combination with metal and in the absence of oxygen. Therefore, adhesive outside the joint will not cure, due to the presence of oxygen.
Remove fresh stains immediately with acetone. Remove cured adhesive with a sharp knife.
Store in a dry, cool and frost free place.