What is it?
Properties
- Acid-free
- Does not affect the lacquer layer
- Permanently elastic
- Water resistant
What does it do?
Suitable for:
For joining traditional (silver) mirrors on all types of surfaces.
Getting started
Before use:
Working conditions
Only apply at temperatures between +5 °C and +40 °C.
Surface requirements
Both parts must be solid, clean, free of dust and grease. Use of primer not required. The surface may be slightly moist.
During use:
Directions for use
Apply the mirror adhesive in vertical stripes (possible moisture behind the mirror can not run away if there are horizontal adhesive stripes) every 10 cm on the back of the undamaged mirror. Mount the mirror within 5 to 10 minutes and press firmly. The space behind the mirror must be well ventilated and remain so. To avoid sliding, secure mirror during drying time (e.g. with tape). Drying time is 3 days.
Points of attention
Do not apply the adhesive by circular movement, but in vertical stripes. Sufficient air must be able to reach the adhesive.
After use:
Stains/residue
Use white spirit for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.
Storage conditions
Close tube properly and store in a dry, cool and frost-freeplace.
