Skip to content

Mildew Remover® Power Foam

EAN: 8710439053257Article No.: 6308291
Mildew Remover instantly destroys mould and algae on walls, floors and joins, both inside and outside. The active power foam formula destroys the most persistent stains on hard to reach places. Visible effect in 10 minutes.
  • Immediately destroys mould, algae and moss
  • Powerful active foam formula
  • Effect in 10 minutes
  • For internal & external use

Properties

  • Immediately destroys mould, algae and moss
  • Powerful active foam formula
  • Effect in 10 minutes
  • For internal & external use

Application

Suitable for:

Suitable for walls, floors and joints in bathrooms, kitchens, cellars, garages, etc. Also suitable for external applications including walls, balconies and flower boxes.

Handling

Before use

Working conditions

Do not use in temperatures ≤ +5 °C.

Surface requirements

Do not use on acid-sensitive materials, such as marble and stone.

Preliminary surface treatment

Do not remove mould and algae beforehand.

Preparation of product

Prepare the spray cap by pulling the trigger to unlock the child safe trigger and rotate the nozzle a quarter turn. Prevent spattering: always prepare first and only then spray.

Coverage

For 4-6 m² of walls or 12-16 m of joints.

During use

Handling Of Packaging

Prepare the spray cap by pulling the trigger to unlock the child safe trigger and rotate the nozzle a quarter turn. Prevent spattering: always prepare first and only then spray.

Directions For Use

Do not remove mould and algae prior to treatment. Scrape off moss layers. Pull trigger to unlock the child safety and rotate the nozzle a quarter turn. Avoid splashes: first prepare nozzle for use and only then spray. Spray the surface from 3-5 cm and leave for 10 minutes. In bad cases repeat treatment after 10 minutes. Clean the treated surface thoroughly with sponge and water. In case of elastic joints (e.g. silicone sealants) repeat the entire treatment (spraying and cleaning). After use close trigger by rotating nozzle downwards into the child safe position.

Points of attention

Cover plants and metal. Avoid splashes on clothing (bleach stains), on gloss paint (matting) and blinds (discoloration). Rinse immediately with water in case of contact. Ventilate well during use. Can cause a brown discoloration on light-colored elastic joints and on delicate tiles. Use on (spack) sprayed ceilings and walls is not advisable. Can loosen loose coatings. It is always advisable to do a test in an inconspicuous place before use. Do not reuse bottle. Do not use in combination with other products, it could release dangerous gases (chlorine). In case of contact with the skin, rinse immediately with water.

After use

Stains/residue

Stains are not removable.

Storage conditions

Store the bottle tightly closed and upright in a stable, dry, cool and frost-free place.

Documents

Similar products