Sealing, protecting and repairing virtually all materials, such as wood, concrete, stone, metal, zinc, bitumen, EPDM (pre-test), PVC, etc. Suitable for indoor and outdoor applications, such as bathrooms, roofs, cellars, walls and gardens. For immediate waterproofing of shower basins, floor seams, gutters, pipe conduits, window frames and skylight joints, ground level items, etc.

Only apply at temperatures above +5 °C.

Ensure surfaces are as dry and clean as possible, remove any dust or grease. Because of the versatility of materials and conditions, it is recommended to do an adhesion test in advance.

Surfaces must be as dry as possible, clean and free of dust and grease. Because of the versatility of materials and conditions, it is recommended to do an adhesion test in advance.

Ensure surfaces are as dry and clean as possible, remove any dust or grease. Apply an overlapping layer if the surface is wider than the tape. Temporary and emergency repairs: the tape can also be used on its own. Permanent repairs: can be used in combination with BISON Rubber Seal®. BISON Rubber Seal® can be applied directly as soon as the circumstances and weather conditions allow. Minimum layer thickness: 2 mm after drying when used in combination with BISON Rubber Seal®.

For long-term protection it is important that the Tape is provided with Rubber Seal® Liquid Rubber.

Properly sealed packages should be stored in a dry, cool, frost-proof location at temperatures between +5 °C and +25 °C.