Skip to content

Silicone Sealant Glass

EAN: 8710439137544Article No.: 6314656
High quality silicone sealant for glass applications (aquariums, display case construction, glass constructions, display windows) and for 3D applications. Water-resistant, permanently elastic, colourfast, UV en water-resistant.
  • (Sea)water resistant
  • Permanently elastic
  • UV and all-weather resistant
  • Excellent bonding without primer
  • Resistant to temperatures between -50 °C and +150 °C
  • Chemical resistant
  • Easy to apply
  • Colourfast
  • 100 % silicone Not harmful for aquatic life

Properties

  • (Sea)water resistant
  • Permanently elastic
  • UV and all-weather resistant
  • Excellent bonding without primer
  • Resistant to temperatures between -50 °C and +150 °C
  • Chemical resistant
  • Easy to apply
  • Colourfast
  • 100 % silicone
  • Not harmful for aquatic life

Application

Suitable for:

Suitable for sealing joints, seams and cracks in the house, glass construction, display case construction, cars, boats and caravans. Especially suitable for bonding and sealing clear glass, frameless aquariums (not harmful for aquatic life after curing), display cases, display windows, glass terrariums, water basins and (double) glass constructions. Adheres to clear glass (non-coated, single-layered), ceramics, glazed tiles, enamel, metal (including aluminium) and various synthetics. Does not bond to bitumen, polyethylene, polypropylene and PTFE. Can also be used for bonding 3D carton.

Handling

Before use

Working conditions

Only apply at temperatures between +5 °C and +40 °C.

Surface requirements

The surface must be dry, clean and free of dust, rust, paint and grease.

Tools

BISON Silicone Multi Tool for tooling the sealant.

Coverage

1 cartridge for approx. 8-15 m (depending on the diameter of the joint).

During use

Handling Of Packaging

Turn the cap off the tube Cut the synthetic cannula diagonally.

Directions For Use

Inject the sealant evenly into the joint, then within 10 minutes tool with BISON Multi Tool or a putty knife or other tool, moistened with a soap solution. After approx. 15 minutes, a surface skin will form. Before putting plants and fish in the aquarium, bonded and/or jointed aquariums will need to air for 4-8 days. After that, the aquarium must have been filled with fresh water 3 to 4 times over a 24-hour time period.

Points of attention

Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing.

After use

Stains/residue

Immediately remove stains with white spirit. The cured sealant can only be removed mechanically or with BISON silicone sealant residue remover.

Storage conditions

Store in properly sealed packaging in a dry place at between +5 °C and +25 °C.

Documents

Similar products