Montagekit® Super Strength

Suitable for:

• Ideal for assembling all kinds of (building) materials, such as wood, stone, concrete, metal and many synthetics on all types of surfaces such as concrete, stone, plasterwork, wood, chipboard, metal and synthetics.
• Very suitable for attaching, e.g., timber framework, skirting boards, doorsteps, window sills, construction boards, paneling, laths, wood strips, ducts, name plates, house numbers, wall covering sheets, panels, thresholds, ceramic tiles, suspension hooks, sockets, electrical boxes.
• Applicable both internally and externally. Also suitable for the bonding of two non-porous materials and the bonding of materials under strain.

• Technical documentation

Working conditions

Use only at temperatures above +5°C.

Surface requirements

Both parts must be dry, clean and free of dust and grease.

Tools

If necessary, use a rubber mallet to tap lightly.

Handling of packaging

Before using, pierce the tube membrane with the puncture point integrated into the cap.

Directions for use

• Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 20 and 40 cm. Always apply adhesive to the corners and along the edges. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible.
• With heavy materials, materials under stress, or two non-porous materials, apply the power bonding method. Mount material, press and immediately loosen. Let dry for 5 minutes, assemble in the same place and press firmly or hammer. Adjustment is not possible. For heavy materials, fastenings or supports may be required.

Advice

• We recommend Bison Montagekit® Polystyrene for fixing polystyrene foam (tempex).
• We recommend the Bison Poly Max® for fastening a non-porous material on a non-porous substrate.
• We recommend Bison Poly Max® for fastening materials in areas with permanent high humidity and/or prolonged contact with water.

Stains/residue

Use white spirit for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Storage conditions

Close container properly and store in a dry, cool and frost-freeplace.