Metal Lock

Locking agent for metal bolts, nuts and screws

Metal Lock

What is it?

Back to top

What does it do?

Suitable for:

Locks bolts, nuts, screws and tap bolts which should be able to be unscrewed later on. Seals screw threads and protects them from rusting.

Back to top

Getting started

Before use:

Working conditions

Do not use at temperatures below +10°C

Preliminary surface treatment

Parts to be locked must be dry and free of dust and oil. Degrease with Thinner for Bison Kit or acetone. Remove any loose rust beforehand with a wire brush or similar.

During use:

Directions for use

Apply Bison Metal Lock to screw thread and assemble. Bison Metal Lock hereby also works as a lubricant. After assembly, do not move or shift parts.

Points of attention

Bison Metal Lock is an anaerobic adhesive. This means that the product cures in combination with metal and in the absence of oxygen. Therefore, adhesive outside the joint will not cure, due to the presence of oxygen.

After use:

Stains/residue

Remove fresh stains immediately with acetone. Remove cured adhesive with a sharp knife.

Storage conditions

Store in a dry, cool and frost free place.

Back to top

Cookies

This site uses cookies to improve your online experience. If you want to learn more or opt out of all or some cookies, click here.