Bison® Moisture Absorber Ambiance

Suitable for:

Thanks to its stylish design, the Moisture Absorber Ambiance is extremely suitable for use in living rooms, bedrooms, bathrooms, toilets, etc.

• Technical documentation

Directions for use

• Initial use and refilling
• 1. Lift the cap on the device.
• 2. Carefully cut open the package containing the tab.
• 3. Insert the tab without the packaging into the special holder of the device.
• 4. Replace the cap on the device.
• 5. When the tab has dissolved completely, the device can easily be emptied.
• Emptying
• 1. Rotate the cap on the device (anticlockwise) and lift it away from the reservoir.
• 2. Place the cap on a surface that may become moist (e.g. newspaper/sink).
• 3. Empty the reservoir into a sink or toilet using the spout, then rinse thoroughly with water.
• 4. Screw the cap back on the reservoir until it 'clicks' and insert a new tab.

Advice

Always position the Bison® Moisture Absorber Ambiance on a flat and stable surface.

Points of attention

When refilling, use only the 450g Moisture Magnet tabs or the Moisture Magnet 450g refill bag. Do not refill using loose crystals. Avoid contact with leather, wood, stone and metal, as these materials can be affected negatively.

Stains/residue

Spilt fluid can cause surface marks. These spots continue to attract moisture. Remove stains with an abundance of water. In the event of stains, clean immediately with plenty of water and pat dry thoroughly. Repeat if necessary.