What is it?
- Safe to use without damage
- Easy to apply
- Thorough effect
What does it do?
Suitable for thoroughly removing cured silicone sealant residues in joints and on substrates. Can be used on ceramic tiles, glass, metal, synthetics, laminates, aluminium and enamels.
Not suitable for:
Not suitable for to be used on nylon. May cause staining on porous materials and painted surfaces.
Do not use in temperatures ≤ +5 °C.
The substrate must be properly dry, clean and free of dust and grease. Remove as much of the existing silicon sealant as possible .
Use a sharp knife/putty knife to cut away the silicone sealant as much as possible and a dry cloth for the last remaining bits.
Directions for use
Apply the paste generously on the silicone residue, after stirring thoroughly. Allow to act for at least 30 minutes. Clean with a dry cloth. If necessary, repeat the treatment. Degrease the surface thoroughly with, e.g. methylated spirits prior to the application of the new silicone sealant.
Store in properly sealed packaging in a dry place at between +5 °C and +25 °C.
Rubber Seal Textile Tape
Strong and elastic textile tape for use in combination with BISON Rubber Seal