Sealant Strip Sanitary

Self-adhesive sealant strip

Sealant Strip Sanitary

What is it?

Back to top

What does it do?

Suitable for:

Suitable for a nice, decorative waterproof sealing of joints along the bath, shower basin, countertop, sink and floor.

Back to top

Getting started

Before use:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Preliminary surface treatment

Thoroughly clean the surface using an abrasive and carefully remove old sealant residue. Treat irregularities in the surface, such as deep tile joints, with a fine filler. Degrease the surface thoroughly with methylated spirits or ammonia (not white spirit!) and allow to dry properly

Tools

Scissors, cutter.

During use:

Directions for use

Cut the sealant strip to size, observing 10-15 mm clearance. Start with the longest joint. Fold double the strip along its entire length and pull back a part of the backing tape. Place the beginning of the strip on the joint and apply the strip while firmly pressing downward. Please note: do not stretch the strip as you press! Cut off the excess strip at the end of the joint. Make sure the strip adheres well everywhere (especially in the tile joints), then apply the other strip(s) in the same way. In corners, overlap strips. Cut the overlapping pieces from the corner at an angle (45°) and remove the pieces. Press the corner again firmly.

After use:

Stains/residue

Remove tape residue with white spirit

Back to top

Cookies

This site uses cookies to improve your online experience. If you want to learn more or opt out of all or some cookies, click here.