Silicone Remover

To safely and thoroughly remove cured silicone sealant residues

Silicone Remover

What is it?

Back to top

What does it do?

Suitable for:

Suitable for thoroughly removing cured silicone sealant residues in joints and on substrates. Can be used on ceramic tiles, glass, metal, synthetics, laminates, aluminium and enamels.

Back to top

Getting started

Before use:

Working conditions

Do not use in temperatures ≤ +5°C.

Surface requirements

The substrate must be properly dry, clean and free of dust and grease. Remove as much of the existing silicon sealant as possible .

Tools

Use a sharp knife/putty knife to cut away the silicone sealant as much as possible and a dry cloth for the last remaining bits.

During use:

Directions for use

Apply the paste generously on the silicone residue, after stirring thoroughly. Allow to act for at least 30 minutes. Clean with a dry cloth. If necessary, repeat the treatment. Degrease the surface thoroughly with, e.g. methylated spirits prior to the application of the new silicone sealant.

After use:

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Back to top

Cookies

This site uses cookies to improve your online experience. If you want to learn more or opt out of all or some cookies, click here.