Bison® Moisture Absorber Original

Suitable for:

Combats condensation, damp and stale smells. Moisture Absorber is odorless, soundless, doesn’t use energy and is easy to refill. The moisture absorber reduces a too high relative humidity level in all closed spaces with little or no ventilation. Ideal for basement, garage, attic, closet, caravan, boat, shed etc.

• Technical documentation

Personal safety

Wear protective gloves.

Directions for use

• INSTRUCTIONS FOR USE – REPLENISHING WITH REFILL BAG OR MOISTURE MAGNET
• 1. Cut the packaging open carefully and take out the refill Bag or Moisture Magnet.
• 2. Remove the lid from the device and place the refill Bag or Tab in the container.
• Attention: make sure the bag does not stick outside the device.
• 3. Replace the lid and Moisture Absorber is ready for use.
• 4. Place the device on a solid and stable surface.
• 5. Moisture Absorber is easy to empty once the salt has completely dissolved (dispose the empty refill bag). See separate instructions for emptying the device.
• 6. Replenish with a new refill.
• INSTRUCTIONS FOR USE – REPLENISHING WITH CRYSTALS
• 1. Cut the packaging open carefully.
• 2. Remove the lid from the device and evenly distribute the crystals in the container untill the ‘MAX’ indicator.
• 3. Replace the lid and Moisture Absorber is ready for use.
• 4. Place the device on a solid and stable surface.
• 5. Moisture Absorber is easy to empty once the salt has completely dissolved. See separate instructions for emptying the device.
• 6. Replenish with a new refill.
• EMPTYING THE DEVICE
• Open the device indoors over the toilet and empty the reservoir. Rinse the toilet well with water.
• Important: Spilled liquid can cause staining. In case of stains wash immediately with plenty of water
• and dab thoroughly dry. Repeat if necessary. Avoid contact with leather and metal: these
• materials are at risk of damage.

Advice

Always place the Bison® Moisture Absorber Original on a flat and stable surface.

Points of attention

At lower temperatures the Moisture Absorber works more slowly and clumping can occur. Increasing the temperature will speed up the working again. Avoid contact with leather, wood, stone and metal, as these materials can be affected negatively.

Stains/residue

Spilt fluid can cause surface marks. These spots continue to attract moisture. Remove stains with an abundance of water. In the event of stains, clean immediately with plenty of water and pat dry thoroughly. Repeat if necessary.