Tube 3 g (Blister)

Universal light-activated repair adhesive


What is it?

Back to top

What does it do?

Suitable for:

  • BISON BOOSTER offers a universal application range and works on transparent as well as on non-transparent materials: Bonds, fills, and seals many plastics, porcelain, ceramics, glass, metal, wood, rubber, and much more.
Back to top

Getting started

Before use:

Personal safety

  • The LED emits a small amount of UV light. UV rays can be harmful for eyes and skin. Do not look directly into sources of UV light. Do not direct the LED at people or animals.

Surface requirements

  • Surfaces to be glued must be clean, dry, and free of dust and grease.

During use:

Directions for use

To pierce the membrane, turn the whole cap clockwise firmly onto the tube. Unscrew the top cap to reveal applicator. Apply adhesive generously to one side and press parts together. Switch on the LED: Place the lamp upright and move the switch downwards. Activate the curing by raying the blue light for 5sec. onto the adhesive (distance < 5cm; emergence of heat is harmless). After use: Clean nozzle with a dry tissue and replace cap quickly to prevent exposure of the remaining adhesive to the light.

After use:


Remove wet glue stains immediately with acetone. Cured glue can only be removed mechanically.

Storage conditions

  • Store the tube upright in the lamp in a cool, dry place.
Back to top