Bison® Moisture Absorber Refill bag

Bag 450 g Neutral

Practical refill bag for refilling Bison® Moisture Absorber

Bison® Moisture Absorber Refill bag

What is it?

Back to top

What does it do?

Back to top

Getting started

During use:

Directions for use

  • Cut the outer packaging carefully open and remove the white refill bag from the packaging.
  • Remove the white cap from the Moisture Absorber and place the refill bag in the container. Note: make sure that the refill bag does not extend outside the container!
  • Place the cap back and the Moisture Absorber is ready for use.
  • When the refill has dissolved completely, the Moisture Absorber can easily be emptied in the toilet or sink. The empty refill bag can be thrown into the waste container.
  • Always place the Moisture Absorber device on a flat stable surface, preferably in a washtub.
  • Always place the Bison® device on a flat stable surface, preferably in a washtub.

Points of attention

At lower temperatures, the Moisture Absorber works more slowly and clumping can occur. Increasing the temperature will speed up the working again.

After use:

Stains/residue

Spilt fluid can cause surface marks. These spots continue to attract moisture. Remove stains with an abundance of water. In the event of stains, clean immediately with plenty of water and pat dry thoroughly. Repeat if necessary.

Storage conditions

Store in well-sealed packaging in a cool, dry and frost free place.

Back to top