What is it?
What does it do?
For joining pipes, sockets and fittings with interference fit in drainage systems. With special pipe brush for quick and easy application. Suitable for diameters ≤ 160 mm. Maximal tolerances 0.3 mm diametrical clearance / 0.2 mm press fit. Suitable for e.g. pipe systems conforming to EN 1329, 1453 and 1455.
Do not use in temperatures ≤ +5 °C.
Indication of the number of joints per 1 L:
Directions for use
1. Cut pipes square, chamfer edges and deburr. 2. Clean surfaces with acetone and a clean, lint-free cloth. 3. Apply adhesive rapidly and evenly all around (4-6x) on both surfaces (pipe thickly, socket thinly). 4. Assemble joint immediately. Joint is adjustable for some time. Remove excess adhesive. Do not load the joint mechanically for the first 10 minutes. Close packaging immediately after use.
Remove adhesive stains with acetone and a clean, lint-free cloth.