Suitable for all kinds of materials: e.g. Wood, metals, stone, plastics (test in advance), ceramic, glass, cork, polystyrene foam and many more onto porous surfaces (e.g. wood, stone, concrete,plaster, chipboard). To all kinds of objects: e.g. skirting boards, laths, window sills, tear plates, thresholds, fascia boards, plate material, insulation material, stair steps, ceramic tiles, polystyrene ornaments and borders.

Not suitable for for PE, PP, PTFE, bitumen, mirrors, natural stone, permanently moist places and for attaching a non-porous material on a non-porous substrate. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic.

Only apply at temperatures between +5 °C and +40 °C.

Both parts must be dry, clean and free of dust and grease. One of the two parts must be porous (absorbent).

Use Bison Power Pistol to apply adhesive. Knife or Bison Multi Tool to open the cartridge. If necessary, use a rubber mallet to tap surface lightly. For surface bonding use a glue spreader (2 mm).

Before using open cartridge at the top by cutting off the plastic nipple above the thread with a multitool. Fix the nozzle onto the cartridge and cut at an angle to the desired diameter.

Wall covering sheets and panels: about 5-8 m²/kg depending on the weight of the material. Lathing, skirting boards and timber framework: about 4-6 m²/kg glued surface.

Cut off screw thread, assemble nozzle and cut to a diameter of at least 0.5 cm.

Depending on the weight of the material, apply the adhesive evenly in strips or dots at intervals of between 20 and 30 cm. Always apply adhesive to the corners and along the edges. For surface bonding apply adhesive thinly and evenly on one side using a glue spreader. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials fasten or support where necessary.

Use water for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Close container properly and store in a dry, cool and frost-freeplace.