Montagekit® Polystyrene

Suitable for:

• Ideal for assembling all kinds of polystyrene foam objects on porous (absoring) surfaces such as concrete, stone, plasterwork, wood and chipboard.
• Very suitable for attaching, e.g., insulation boards, decoration plates, ceiling tiles, decorative materials in polystyrene foam such as ornaments and decorative edgings.
• Also extremely suitable for surface bonding.

• Technical documentation

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

Both parts must be dry, clean and free of dust and grease. One of the two parts must be porous (absorbent).

Tools

Use putty knife or spatula to apply. If necessary, use a rubber mallet to tap lightly. For surface bonding use a glue spreader (2 mm).

Directions for use

Depending on the weight of the material, apply the adhesive evenly in strips or dots at intervals of between 20 and 30 cm. Always apply adhesive to the corners and along the edges. For surface bonding apply adhesive thinly and evenly on one side using a glue spreader. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials fasten or support where necessary.

Advice

• We recommend Bison Montagekit® Super Strength for fastening materials under strain.
• We recommend the Bison Poly Max® for fastening a non-porous material on a non-porous substrate.
• We recommend Bison Poly Max® for fastening materials in areas with permanent high humidity and/or prolonged contact with water.
• For fastening natural stone, we recommend Bison Poly Max®.

Stains/residue

Use water for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Storage conditions

Close container properly and store in a dry, cool and frost-free place.