What is it?
What does it do?
For crystal clear, waterproof and strong bonding of models made of polystyrene (PS), such as model cars, planes, houses and boats. Also suitable for other synthetics (ABS, San, SB and ASA).
Not to be applied at temperatures below +5°C.
Materials to be bonded must be clean, dry and free of dust and grease.
Preliminary surface treatment
If necessary degrease with acetone.
Directions for use
Apply a thin layer of adhesive and join parts almost directly, in any case while glue layer is still moist. Remove excess glue immediately.
Remove adhesive residue immediately with acetone. Dry adhesive residue can only be removed mechanically.
Store in a dry, cool and frost free place.