What is it?
- Fast curing: 5-10 minutes
- Easy to apply
- Can be used indoors and outdoors
- Water resistant: suitable for continuous water exposure
- Even cures under water!
- Does not deform
- No shrinkage: remains in original form
- Chemical resistant
- Grinding, drilling, sawing and painting possible after curing
What does it do?
For 1001 repairs in and around the home, car, boat and caravan, machines and tools. Fill cracks and holes in stone, wood, steel, and many synthetics. Tip: Can also be used as a mouldable plug to fill screw holes.
Not suitable for:
Not suitable for PE (polyethylene), PP (polypropylene) and PTFE
Recommended application at temperatures between +15 °C and +25 °C.
Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.
Preliminary surface treatment
The surface must be properly sanded and then cleaned and degreased.
A moist knife to cut off the required amount from the stick.
Directions for use
Cut the required Epoxy Repair with a damp knife from the rod (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Store in a dry, cool and frost free place.