Rock solid dual-component epoxy putty.

Not suitable for Polyethylene (PE), polypropylene (PP), PTFE.

Only apply at temperatures between +15 °C and +25 °C.

The materials to be bonded must be dry, clean, free of dust and grease.

Degrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper).

A moist knife to cut off the required amount from the stick.

Cut the required quantity from the rod with a damp knife (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.

Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.

Remove fingerprints by rubbing with water or a damp cloth before curing starts.

Store cool, dry, frost-free and tightly closed.