Super Glue PRECISION

Dispenser 3 g (Blister)

Shock-proof dispenser with easy grip system for precise applications

Super Glue PRECISION

What is it?

Back to top

What does it do?

Suitable for:

Ideal for small-area bonds. Glues almost all solid and flexible materials such as many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), leather, porcelain, ceramics, metal, wood, cork, felt, cloth (check suitability first), and rubber. Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken).

Back to top

Getting started

Before use:

Working conditions

Do not use at temperatures below +10°C. The glue responds best to an air humidity level of 50-70%.

Surface requirements

Materials to be glued must be clean, dry, free of dust and grease and well-fitting.

During use:

Directions for use

1. To pierce the membrane, turn the whole cap clockwise firmly onto the dispenser. Do not press the black handles while piercing. 2. Unscrew the top cap to reveal the applicator. Apply a thin layer of adhesive to one side by slightly pressing the handles of the dispenser. Press parts together immediately. Surfaces to be glued together must be of exactly the same shape and size. After use, clean nozzle with a dry tissue and close the tube by replacing the cap.

Advice

When glueing at low humidity, curing time can be shortened by briefly breathing onto one of the parts to be assembled. The best glueing results are reached at room temperature.

Points of attention

Contains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause respiratory irritation. Avoid breathing vapours. Keep out of the reach of children.

After use:

Stains/residue

Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first).

Storage conditions

Store in a dry, cool, frost-free place. Storage below +5°C (in refrigerator) ensures maximum shelf life.

Back to top
*/-->