Epoxy Repair Aqua

Stick 56 g

Rock solid dual-component epoxy putty

Epoxy Repair Aqua

What is it?

Back to top

What does it do?

Suitable for:

Rock solid dual-component epoxy putty.

Not suitable for:

Not suitable for Polyethylene (PE), polypropylene (PP), PTFE.

Back to top

Getting started

Before use:

Working conditions

Only apply at temperatures between +15 °C and +25 °C.

Personal safety

Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.

Surface requirements

The materials to be bonded must be dry, clean, free of dust and grease.

Preliminary surface treatment

Degrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper).

Tools

A moist knife to cut off the required amount from the stick.

During use:

Directions for use

Cut the required quantity from the rod with a damp knife (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.

After use:

Stains/residue

Remove fingerprints by rubbing with water or a damp cloth before curing starts.

Storage conditions

Store cool, dry, frost-free and tightly closed.

Back to top

Similar products

Back to top