For 1001 repairs in and around the home, car, boat and caravan, machines and tools. Fill cracks and holes in stone, wood, steel, and many synthetics. Tip: Can also be used as a mouldable plug to fill screw holes.

Not suitable for PE (polyethylene), PP (polypropylene) and PTFE

Recommended application at temperatures between +15 °C and +25 °C.

The surface must be properly sanded and then cleaned and degreased.

A moist knife to cut off the required amount from the stick.

Cut the required Epoxy Repair with a damp knife from the rod (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.

Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.

Remove fingerprints by rubbing with water or a damp cloth before curing starts.

Store in a dry, cool and frost free place.